Colin's Radio Control

Dragonfly 2

Smaller version of Dragonfly with upgraded & 3D printed parts.

Dragonfly 2 - construction started

I have started building a second Dragonfly tri-copter.

Dragonfly 2 will be smaller than the original Dragonfly as the spars are made from old cutoffs.  The motor mounts and tail assembly are 3D printed (thanks Bill for the printing!).

Dragonfly 2 - Construction phase 01
 The video below shows a servo test of the tail assembly.  The motor has been left off so that the servo & linkage can be seen clearly.