Similar to Dragonfly 3 but with more 3D printed parts, Skyline32 flight controller and aluminium spars.
| Type | Tricopter | Home made |
|---|---|---|
| Receiver | Turnigy IA6C | 8 channel |
| Ch 1 | Roll | |
| Ch 2 | Pitch | |
| Ch 3 | Lift | |
| Ch 4 | Yaw | |
| Ch 5 | Mode | Acro / Auto-Level / Heading Hold / Head-free / Altitude Hold |
| Ch 6 | Barometer | |
| Ch 7 | Magnetometer | |
| Ch 8 | Arm | |
| Flight Controller | Skyline 32 | |
| Battery | 3S LiPo | |
| Motors | Fc 2812 1534kv | |
| Circumdiameter | 96 cm | |
| Weight | 965g | |
| Takeoff Weight | 1180g | Including 2200mAh 3S LiPo |
There are no articles in this category. If subcategories display on this page, they may have articles.