| Hardware | Comments | |
|---|---|---|
| Type: | High wing trainer | |
| Source: | HobbyKing | |
| Material: | EPO foam | |
| Wingspan: | 1300 mm | |
| Length: | 920 mm | |
| Take off weight: | 1150 g | |
| Controls: | Ailerons, Elevator, Throttle (with reverse), Rudder, Flaps, optional candy dropper | |
| Receiver: | ELRS. Matek R24 D with 10 ch PWM converter | |
| ESC: | 40A | |
| Battery | 3S lipo, usually 2200mAH | |
| Motors: | 3635-900KV Brushless Outrunner | |
| Propeller: | 12 X 6 carbon fibre | |
| HD Camera: |
N/A |
|
| FPV Camera | N/A | |
| Landing gear | Fixed. Bush type tyres. Supplied with floats. Optional skis available |
My Tundra is now about 5 years old and the EPO foam that forms the hinges for the Ailerons, Elevators and Rudder is begginning to crack. I have uploaded some pictures of this to the gallery.
I have now repaired the hinges with a double layer of Blenderm tape.
The Durafly Tundra is a high wing foamy trainer from HobbyKing.
I purchased this plane after crashing the Wot4.